Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the daily mileage (trip) of the Audi Q3

Model: Audi Q3 8U - Years 2011-2018
Part: Checks and maintenance

Below we will see the instructions that will allow us to reset the daily mileage (trip) of the Audi Q3. First of all, we get on board the car and start the instrument panel; then we go to the trip menu using the arrow keys found to the left of the steering wheel, and then press and hold the "ok" button to reset the partial mileage counter, as shown in the video. The partial mileage counter can be reset at any time and is useful for keeping track of the miles traveled during a trip.

Posted on 26 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2020 Audi Q3
How to Reset the Service Light on a 2020 Audi Q3
Audi Q3 (2018-2025 / F3) In this new mini guide, you will discover how to correctly perform the manual reset of the service light on the instrument cluster of your 2020 Audi …
How to Reset the Service Light on the Audi Q3?
How to Reset the Service Light on the Audi Q3?
Audi Q3 (2011-2018 / 8U) To reset the Service light on the Audi Q3, turn on the ignition by inserting the key into the ignition switch. Once the display is on, navigate throu…
How to Reset the Trip Odometer on the Audi Q3?
How to Reset the Trip Odometer on the Audi Q3?
Audi Q3 (2011-2018 / 8U) To reset the trip odometer on the Audi Q3, turn on the instrument cluster by inserting the key into the ignition and turning it. This will power up t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos