Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs on an Audi A4

Model: Audi A4 B9 - Years 2014-2024
Part: Tail light bulb

In this brief guide, you will find instructions to remove and replace the rear headlight bulbs on an Audi A4. First, open the trunk and start removing the side plastic cover; then, unscrew the screws of the light assembly, disconnecting the electrical connector of the bulbs to remove it, as shown in the video. At this point, separate the bulb holder from the housing, giving you access to all the bulbs; replace the faulty ones with new ones that have the same base, checking the operation of the brake lights and reassembling the headlight!

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the third brake light on the Audi A4
How to replace the third brake light on the Audi A4
Audi A4 (2000-2004 / B6) Today's steps will show us how to disassemble and replace the third brake light on the Audi A4. First, we open the rear trunk door and start removing…
How to Replace the Battery in an Audi A4
How to Replace the Battery in an Audi A4
Audi A4 (2000-2004 / B6) Follow these simple steps to remove and replace the battery in your Audi A4. First, open the hood of the vehicle and disconnect both battery terminal…
How to replace the brake servo sensor on an Audi A4 B9
How to replace the brake servo sensor on an Audi A4 B9
Audi A4 (2014-2024 / B9) In this video, we see how to replace the brake servo sensor on an Audi A4 B9: this is a component that detects the pressure applied to the brake peda…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos