Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on AUDI A4

Model: Audi A4 B7 - Years 2004-2008
Part: Air filter

To replace the engine air filter on the Audi A4, start by parking the car on a level surface and securing it. Open the hood and begin removing part of the plastic air duct leading to the engine. To remove the section closest to the radiator, unscrew the two screws that hold it in place. At this point, you have access to the connection between the duct and the filter box. After loosening the clamp, disconnect the duct. Now you can unscrew the screws that close the filter box and remove the filter itself. Insert the new filter into the housing and reverse the steps previously shown in the images to reassemble everything. At this point, you're done!

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in an Audi A4
How to Replace the Cabin Air Filter in an Audi A4
Audi A4 (2007-2016 / B8) Before starting, open the hood of your Audi A4. Next, disconnect the electrical connector attached to the air filter duct. Then, loosen the metal cla…
How to Replace the Air Filter on Audi A4 B9
How to Replace the Air Filter on Audi A4 B9
Audi A4 (2014-2024 / B9) If your Audi A4 B9 engine is experiencing frequent overheating and loss of power, it means that the air filter located inside the engine compartment …
How to Replace the Cabin Air Filter in an Audi A4
How to Replace the Cabin Air Filter in an Audi A4
Audi A4 (2007-2016 / B8) Replacing the cabin air filter in an Audi A4 is a straightforward task that you can do on your own. Just follow the instructions in our video tutoria…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos