Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear tailgate panel of the Audi A4

Model: Audi A4 B9 - Years 2014-2024
Part: Door trim panel

In this short guide, we will see the instructions that will allow us to disassemble and remove the rear tailgate panel of the Audi A4. First, we open the rear tailgate of the trunk and start removing the various plastic covers and the emergency triangle that we find inside; then we unscrew the two fixing screws, as shown in the video. At this point, we lever on the sides to detach and remove the lining, thus accessing the inside of the trunk tailgate; we make any necessary repairs and reattach the plastic lining.

Posted on 11 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the tailgate panel of the Audi A4 Avant
How to remove the tailgate panel of the Audi A4 Avant
Audi A4 (2000-2004 / B6) Today we will see, in this video, how to remove and replace the rear hatch panel of the Audi A4 Avant, following these simple steps. First of all we …
Disassembly of the rear windshield wiper motor of the Audi A4.
Disassembly of the rear windshield wiper motor of the Audi A4.
Audi A4 (2007-2016 / B8) The steps illustrated in this guide will show us how to disassemble and replace the rear windshield wiper motor or rear wiper of the Audi A4. First, …
How do you remove the inner panel of the rear tailgate of the Audi A4?
How do you remove the inner panel of the rear tailgate of the Audi A4?
Audi A4 (2007-2016 / B8) In order to remove the inner panel of the rear tailgate of the Audi A4, you need to open the tailgate itself, so that you can remove the coverings of…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos