|
Do it yourself
| |||
| ||||
|
In the video tutorial in question we will see how to remove the steering wheel airbag on various Audi models (A3, A4, A5 etc.), in simple steps. First of all we get inside the car: we turn the steering wheel counterclockwise so that we can unscrew the screw that we find at the top. At this point we put the steering wheel back in straight position and we go to remove our airbag that will have released; finally disconnect its electrical connector to remove it definitively. For reassembly, simply apply the reverse procedure. If we want to remove the steering wheel we should only unscrew the central bolt!
Posted on 30 November 2020 by ScegliAuto
Video tutorial
Related tutorials
Audi A3
(2012-2019 /
MK 3, 8V)
I recommend performing this procedure with the battery disconnected. Before we can begin, we will have to go and sit in the driver's seat of our Audi…
Audi A3
(2003-2013 /
8P, MK 2)
How to remove the steering wheel of an Audi A3? Let's see in this video how to proceed with the removal. Before disassembling the steering wheel airb…
Audi A3
(2012-2019 /
MK 3, 8V)
Today we will explain how to remove the steering wheel airbag on an Audi A3 model 8V. To remove the airbag, first we need to remove the steering whee…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.101
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
