Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the glove box Audi A6 C5

Model: Audi A6 C5, MK 2 - Years 1997-2004
Part: Glove compartment

In this video tutorial we will see how to disassemble the glove box of an Audi A6 C5, following these simple instructions. First we get inside the car and open the glove box; after which we remove the torx screws that we find on the internal upper part, using a torx screwdriver; after which we unscrew the screws that we find under the glovebox and we go to remove the latter, going to disconnect the electrical connector that we find on the back. We just have to follow the video to the end to better understand all the steps!

Posted on 12 December 2020 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the glove box on Audi A6 c5
Replacement of the glove box on Audi A6 c5
Audi A6 (1997-2004 / C5, MK 2) Hello everyone! Today we will explain how to remove a glove box on Audi A6. Open the glove compartment and, with an 8 mm wrench, unscrew the three bo…
How to remove and replace the armrest on Audi A6
How to remove and replace the armrest on Audi A6
Audi A6 (2004-2012 / C6, MK 3) Let's see in this tutorial how to disassemble and replace the armrest, without disassembling the lower support and the small glove box of the same, o…
How to disassemble the storage drawer of the Audi A6.
How to disassemble the storage drawer of the Audi A6.
Audi A6 (1994-1997 / C4, MK 1) Today's instructions will show us the procedure that will allow us to disassemble and replace the glove compartment of the Audi A6. First, we get int…

How to Replace the Key Fob Battery for an Audi A4

How do you replace the battery in the key fob of an Audi A4? Let's see how to do it in detail: take your remote and press the button to release the metal key (if present). Once extracted, use a lever to separate the two covers (as shown in the video). Remove the dead battery from the compartment (after separating the two halves of the covers), take a new one of the same size and voltage. Reassemble the plastic battery holder into the remote cover, then insert the metal key back into the cover. Check the remote's proper functioning.

Watch the video!


by ScegliAuto

More videos