Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the coolant temperature sensor of an Audi A6

Model: Audi A6 C5, MK 2 - Years 1997-2004
Part: Engine coolant temperature sensor

Before we can start, we will have to go and open the front hood of our Audi A6. So let's start by disengaging and removing the upper engine covers. After that, we will have to go and move the upper harnesses, and then we will have to pull out and remove the oil dipstick. At this point, we will have to remove the air filter block and its sleeves. By doing so, we will have reached the temperature sensor. We then proceed by disconnecting the relative plug. When we have completed this step, we will have to remove the clip that secures the coolant temperature sensor, then remove the sensor itself, and we will have finished the disassembly.

Posted on 3 February 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Heater Valve
Replacing the Cabin Heater Valve
Audi A6 (2004-2012 / C6, MK 3) The flow of coolant through the cabin heater radiator is controlled by electric valves managed by the automatic climate control unit. Depending on th…
How to replace the hood release cable of the Audi A6.
How to replace the hood release cable of the Audi A6.
Audi A6 (1994-1997 / C4, MK 1) Today we will explain how to replace the hood release cable on a 1990 Audi A6. To open the hood in case it doesn't open from inside the vehicle, we n…
How to reset the tire pressure warning light on Audi A6.
How to reset the tire pressure warning light on Audi A6.
Audi A6 (2011-2018 / C7, MK 4) The tire pressure sensor in the Audi A6 mk7, produced from 2011 to 2018, can be reset using the vehicle's monitor. After checking the tire pressure, …

Other guides you may be interested in

How to Replace the Front Headlamp Bulbs on a Mazda 3

Learn how to replace the front headlamp bulbs on a Mazda 3 with LED bulbs: open the bonnet (pull the lever located at the bottom right of the dashboard), and secure it with the prop rod. Locate the inspection cap of the headlamp (located at the rear of the headlamp) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the bulbs using a screwdriver. Install the new LED bulbs (ensuring the type and size are correct) and insert the bulb holder back into the headlamp housing. Refit all previously removed parts.

Watch the video!


by ScegliAuto

More videos