Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the car stereo of an Audi Q5

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Car stereo

Start by sitting in the driver's seat of our Audi Q5. Then we will have to disengage and move the car radio frame, levering it with a thin but resistant tool. After we have moved the frame, we will have discovered the screws that secure the car radio to the dashboard. We then proceed by unscrewing and removing the screws that we discovered. Once this is done, we will have to remove the car radio from its seat, and then disconnect the electrical power plugs. When we have disconnected the electrical plugs, we will have finished disassembling the car radio of our Audi Q5.

Posted on 20 May 2021 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the cabin fan in the Audi Q5?
How to disassemble the cabin fan in the Audi Q5?
Audi Q5 (2017-2025 / 80A, MK 2) In this tutorial we can see how to disassemble the cabin fan in the Audi Q5, an extremely simple and fast operation. First of all, make sure the key …
How to disassemble the headrests of the Audi Q5
How to disassemble the headrests of the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Following the instructions in this guide, we will see how to disassemble and remove the front headrests, but it also applies to the rear headrests, o…
How to disassemble the front door panel of the Audi Q5
Audi Q5 (2017-2025 / 80A, MK 2) Today we will discover the instructions that will allow us to disassemble the front door panel of the Audi Q5, in simple and quick steps. First of al…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos