Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi A5 removing the headlight

Model: Audi A5 8T8, 8T3, 8T, 8F - Years 2007-2016
Part: Headlight

Does the headlight need to be changed because it is damaged? Let's see the disassembly of the front headlight of an Audi A5. We raise the front hood to access the headlights of our car. We disassemble the plastic cover in the upper part of the headlight: we remove the plastic cover by unscrewing the screws. After removing the plastic cover, we unscrew the fastening screws of the headlight. We remove the damaged headlight and replace it with a new one. We close the front hood after maintenance: we use the left knob inside the dashboard to turn on the headlights. We test the operation of the bulbs in the new headlight.

Posted on 25 July 2021 by ScegliAuto

Video tutorial

Related tutorials

Removing the rear headlight Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) In today's video tutorial we will see how to remove the rear light of an Audi A5. First we open the boot lid and remove the side cover covered with c…
How to replace the lamp on Audi A5
How to replace the lamp on Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Do we have burnt out headlight bulbs? Let's see how they remove the headlight from inside. We lift the front headlight of the A5, we identify the pie…
Replacement of the front headlight bulb of the Audi A5
Replacement of the front headlight bulb of the Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) The following steps will show us how to disassemble and replace the headlight bulb of the Audi A5. First, open the hood of the car and start removing…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos