Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do i replace the remote control battery of the Audi A3?

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Key

In order to replace the battery of the Audi A3 remote control, you have to lift the cover on the rear part of the remote control, which is located immediately below the manufacturer's logo. By removing the cover, you will be able to access the battery and pry it out with an object. Once the old battery has been removed, it will be possible to install the new one simply by inserting it into its housing and closing the remote control with its cover. After replacing the battery, you will be able to check the correct operation of the remote control.

Posted on 25 October 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Audi A3 remote control
How to replace the battery of the Audi A3 remote control
Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the battery of the RS model remote control for the Audi A3. The battery we will use is a CR 2032. Pull up the to…
How do I replace the remote control battery of the Audi A3?
How do I replace the remote control battery of the Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) In order to replace the battery of the Audi A3 remote control, you need to press the button to lift the key and use a screwdriver to pry inside its h…
How do I replace the remote control battery of the Audi A3?
How do I replace the remote control battery of the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) In order to replace the battery of the Audi A3 remote control, you need to use an object that acts as a lever, such as a flat screwdriver, to pry int…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos