Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q7
    4. : Guide to removing the timing chain on the Audi Q7 3.0 TDI

Audi Q7 - Video tutorial

Model: Audi Q7 4L, MK 1 - Years 2006-2015
Part: Timing belt
Operation: Guide to removing the timing chain on the Audi Q7 3.0 TDI

In today's video we will see the main instructions to disassemble and replace the timing chain kit on the Audi Q7 first series, with 3.0 TDI engine. First you need to remove the front bumper; in the case of the video, the entire monobloc is removed from the car, thus disconnecting it from the transmission, in order to be able to work better on our distribution kit. Then remove the cylinder head covers and the distribution side cover; we remove the chain tensioners and proceed with the removal and replacement of the timing chain, following the instructions in the video!


Posted on 13 March 2024 by ScegliAuto



Guide to replacing the starter motor of the Audi Q7 3.0 TDI
Audi Q7 (2006-2015 / 4L, MK 1) Today's guide will show us how to disassemble and replace the starter motor of the Audi Q7 3.0 TDI, as well as the Volkswagen Touareg. First, we open
How to remove the front headrest of the Audi Q7
Audi Q7 (2015-2024 / 4M, MK 2) Following these brief steps, we will see how to disassemble and eventually replace the front headrest of the Audi Q7. First of all, we get on board t
Guide to disassembling the external rearview mirror of the Audi Q7.
Audi Q7 (2006-2015 / 4L, MK 1) In this guide, we will discover the method for disassembling and replacing the external rearview mirror of the Audi Q7, following these simple steps.

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos