Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the rear headlight Audi Q3

Model: Audi Q3 8U - Years 2011-2018
Part: Tail light

In today's video tutorial we will see how to remove the rear light of an Audi Q3, in simple steps. First we open the trunk lid and with something thin and pointed we go to remove the plastic from the affected side; then let's unscrew the fixing screws of the light that we find inside the holes, using a socket wrench. At this point we can extract the light from the outside, disconnecting the electrical connector of the bulbs, as shown in the video. We just have to replace it and reassemble everything, applying the reverse procedure!

Posted on 13 December 2021 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the rear light of the Audi Q3
Disassembly of the rear light of the Audi Q3
Audi Q3 (2011-2018 / 8U) In this guide, we will see how to disassemble and replace the rear taillight of the Audi Q3. First, open the rear hatch of the trunk and start removi…
How to disassemble and replace the rear headlight of the Audi Q3
How to disassemble and replace the rear headlight of the Audi Q3
Audi Q3 (2011-2018 / 8U) Below we will see the instructions that will allow us to disassemble and replace the rear taillight of the Audi Q3, in simple steps. First, we open t…
Disassembly and assembly of the front headlight of the Audi Q3
Disassembly and assembly of the front headlight of the Audi Q3
Audi Q3 (2011-2018 / 8U) Let's find out, in this video tutorial, how to remove and replace the front light of the Audi Q3, but also of the Q5. First of all, we open the bonne…

Removing and Replacing a Front Headlamp of a Lancia Lybra

This video explains how to remove and replace the front headlamp and its bulbs on a Lancia Lybra. The car has a very simple and quick headlamp removal system. To start, lift the bonnet, reach into the engine bay, and (specifically at the rear of the headlamp) unclip the metal tab that secures the headlamp, then use a screwdriver to undo the few Torx screws. After removing the screws, unclip the headlamp and pull it out from the bumper, disconnect the power connectors, and replace any damaged bulbs or the entire unit. The reassembly phase is very straightforward: insert the headlamp into the bumper housing as shown in the video, secure the metal tab until the headlamp clicks into place (screw in the securing screws). Finally, test the correct operation of the lights.

Watch the video!


by ScegliAuto

More videos