Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Pads

Model: Audi Tt MK 1, 8N - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Brake pads

See other generations:
Video tutorial

Once you lift the vehicle on appropriate jack stands, remove the front wheel and check the wear on both the rotors and the pads. Then, remove the brake caliper by first disconnecting the retaining spring for the pads and unscrewing the caliper mounting bolts.

Pull out the old pads and also remove the caliper bracket and the rotor mounting bolt. Take off the old rotor, clean the corresponding seat on the hub, and apply the new rotor.

Next, install the caliper bracket, push back the caliper piston, insert the new pads, and reattach the caliper, repositioning the retaining spring.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Brake Pads and Rotor on an Audi TT
Replacing the Rear Brake Pads and Rotor on an Audi TT
Audi Tt (1998-2006 / MK 1, 8N) Today's guide will show you how to remove and replace the rear brake pads and rotor on an Audi TT by following these simple steps. First, lift the ve…
Replacing Rear Brake Pads
Replacing Rear Brake Pads
Audi Tt (2006-2014 / 8J, MK 2) Lift the vehicle on appropriate jack stands and remove the rear wheel; then unscrew the retaining bolts of the brake caliper to remove it; next, take…
How to replace the rear headlight bulb of the Audi TT
How to replace the rear headlight bulb of the Audi TT
Audi Tt (2006-2014 / 8J, MK 2) Replacing the brake light bulb or the rear headlight bulb on the Audi TT is a simple and quick operation to be carried out independently. To replace …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos