Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Audi TT

Model: Audi Tt MK 2, 8J - Years 2006-2014
Part: Tail light bulb

Replacing the brake light bulb or the rear headlight bulb on the Audi TT is a simple and quick operation to be carried out independently. To replace the bulb, we need to open the trunk and use a flat-head screwdriver to lift the round side cover of the headlight entrance. Disconnect the bulb connector, press on it to release the headlight and perform the bulb replacement. After replacing the bulb, reassemble the cover and test the operation by turning on the vehicle lights.

Posted on 9 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of an Audi TT?
How to replace the headlight bulb of an Audi TT?
Audi Tt (2006-2014 / MK 2, 8J) Before starting, we will need to open the front hood of our Audi TT. We begin by removing the covers around the front headlight. Next, we will need t…
How to Remove the Rear Headlight of an Audi TT?
How to Remove the Rear Headlight of an Audi TT?
Audi Tt (1998-2006 / 8N, MK 1) If you need to replace a bulb in the rear headlight of your Audi TT, follow the steps in the attached video tutorial. Start by opening the small acce…
Replacement of the headlight bulb of the Audi TT.
Replacement of the headlight bulb of the Audi TT.
Audi Tt (2006-2014 / MK 2, 8J) Let's discover the information that will allow us to disassemble and replace the headlight bulb of the Audi TT. First of all, we open the hood of the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos