Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Pads

Model: Audi Tt 8J, MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake pads

See other generations:
Video tutorial

Lift the vehicle on appropriate jack stands and remove the rear wheel; then unscrew the retaining bolts of the brake caliper to remove it; next, take out the old pads and use the appropriate tool to retract the piston: in this case, the piston should not be pushed in, but turned clockwise.

Then install the new pads and reassemble the brake caliper.

Repeat the same process on the other wheel. Pump the brake pedal until it provides the correct resistance and pay attention during the initial braking.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Replacing Front Brake Pads
Replacing Front Brake Pads
Audi Tt (1998-2006 / MK 1, 8N) Once you lift the vehicle on appropriate jack stands, remove the front wheel and check the wear on both the rotors and the pads. Then, remove the bra…
How to replace the rear headlight bulbs in the Audi TT?
Audi Tt (1998-2006 / MK 1, 8N) In this tutorial we can see how to replace the rear light bulbs in the Audi TT, an extremely simple and quick operation. First of all, make sure that…
Replacing Rear Bulbs on Audi TT
Replacing Rear Bulbs on Audi TT
Audi Tt (1998-2006 / MK 1, 8N) Open the trunk door and look inside from the side: you will notice that there are two access panels (one on each side) within the frame. Open them us…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos