Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Brake Pads and Rotor on an Audi TT

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Brake pads

Today's guide will show you how to remove and replace the rear brake pads and rotor on an Audi TT by following these simple steps. First, lift the vehicle and start unscrewing the wheel bolts to remove the wheel; then unscrew the bolts securing the brake caliper, removing it from the rotor, as shown in the video. Now, apply pressure to the caliper piston to remove the old brake pads; unscrew the bolts of the rear brake rotor, replacing it with the original one. All that's left is to reassemble the entire brake system!

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi Tt (2006-2014 / MK 2, 8J) Replacing the brake light bulb or the rear headlight bulb on the Audi TT is a simple and quick operation to be carried out independently. To replace …
Audi Tt (2006-2014 / MK 2, 8J) Let's discover the information that will allow us to disassemble and replace the headlight bulb of the Audi TT. First of all, we open the hood of the…
Audi Tt (1998-2006 / 8N, MK 1) In this short and simple guide, learn how to remove and replace the coolant temperature sensor on the Audi TT 1.8T. First, open the hood of your car …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos