Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Radiator Cover

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Radiator

See other generations:
Video tutorial

Once you open the hood, there is a plastic cover between the grille and the shroud, which protects both the radiator and the electric fan. This cover is secured to the shroud with four Torx screws and then clipped behind the grille with plastic tabs.

To remove it, unscrew the four screws, lift the rear edge (toward the cabin), and pull back to release the tabs.

During this operation, avoid bending up and down as the tabs may break.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Guide to Disassembling the Camshaft of the Audi A4 2.0 TFSI
Guide to Disassembling the Camshaft of the Audi A4 2.0 TFSI
Audi A4 (2007-2016 / B8) In this guide, you will see the main steps for disassembling and replacing the camshaft of the Audi A4 2.0 TFSI. To disassemble the camshaft, you mus…
Removing and Replacing the Shift Knob on the Audi A4 B8
Removing and Replacing the Shift Knob on the Audi A4 B8
Audi A4 (2007-2016 / B8) Let's discover the steps that will allow us to remove and replace the shift knob on the Audi A4 B8, following the instructions below. First, get insi…
How to Remove the Starter Motor from the Audi A4
How to Remove the Starter Motor from the Audi A4
Audi A4 (2004-2008 / B7) To remove the starter motor from the Audi A4, open the hood and disconnect the battery terminals. Next, remove the soundproofing panel from the engin…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos