Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating radiator on Audi A4 B6

Model: Audi A4 B6 - Years 2000-2004
Part: Heater core

Let's see in this video the main instructions to remove and replace the radiator of the passenger compartment heating of the Audi A4 B6. First of all we open the bonnet and start by detaching the two pipes that we find on the upper part of the engine compartment, loosening the screws of the metal clamps; let the radiator liquid drain into a container. At this point we access the driver's side to remove the panel near the pedal board; we disconnect the various wiring and remove the pipes from the radiator. Now we unscrew the bracket screws to remove and replace the heating radiator, following the video to the end!

Posted on 12 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the heating radiator of an Audi A4
How to remove the heating radiator of an Audi A4
Audi A4 (2004-2008 / B7) Let's see how to remove the heating radiator of an Audi A4. We remove the plastic of the lining of the central tunnel (with special plastic or metal …
How do you replace the Audi A4 heating radiator?
How do you replace the Audi A4 heating radiator?
Audi A4 (1994-2000 / B5) In order to replace the Audi A4 heating radiator, the entire dashboard must be removed from both the passenger and the driver's side. Once the screws…
How do you replace the heating radiator of the Audi A4?
How do you replace the heating radiator of the Audi A4?
Audi A4 (1994-2000 / B5) In order to replace the heating radiator of the Audi A4's cabin, you need to completely disassemble the dashboard of the car, starting with the remov…

Other guides you may be interested in

How to Change the Diesel Filter on a Renault Captur 1.5 dCi

The diesel filter on the Renault Captur is always of the immersion type, but instead of being located at the top of the engine bay, it is positioned lower, inside the front right wheel arch (passenger side), practically under the headlamp. To replace it, it is advisable to lift the vehicle, remove the front right wheel and the corresponding inner lining to access the filter location. Unscrew the fastening nuts of the support clamp to extract it from its housing and disconnect the connector and pipes. At this point, unscrew the fixing screws of the cap, remove the old filter and insert the new one, also replacing the O-ring seals, and then reverse the steps for installation. Before starting the engine, turn the ignition on and off several times to allow the filter to fill.

Watch the video!


by ScegliAuto

More videos