Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Pressure Light on an Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part:

In this video, you can see how to reset the low tire pressure light on an Audi A4, a very simple operation to perform only after restoring the correct pressure in all the tires. Start by turning on the instrument cluster, not the engine, then press and hold the "Reset" button located at the bottom of the right lever. Keep holding until a menu appears, where you will select "set" and then "tire pressure." At this point, select "store" to perform the reset, and turn the instrument cluster off and back on to complete the procedure.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on an Audi A4
How to Reset the Tire Pressure Light on an Audi A4
Audi A4 (2014-2024 / B9) To reset the tire pressure light on an Audi A4, turn on the ignition by selecting "Car" on the display in the center of the dashboard. You will need …
How to reset the tire pressure sensor on the Audi A4 2015
How to reset the tire pressure sensor on the Audi A4 2015
Audi A4 (2007-2016 / B8) If on your 2015 Audi A4 there is no puncture or loss of tire pressure, but the warning light continues to stay on constantly on the instrument panel,…
How to reset the tire pressure sensor of an Audi A4?
How to reset the tire pressure sensor of an Audi A4?
Audi A4 (2014-2024 / B9) To reset the tire pressure warning light on an Audi A4, start by turning on the instrument panel without starting the engine. Use the dial located on…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos