Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Airbag Malfunction Light

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Warning light – error code

See other generations:
Video tutorial

If the airbag malfunction light remains on in the instrument cluster, perform a code reading with a diagnostic tool to investigate the nature of the fault (you can also use a generic diagnostic tool, not necessarily the official one from the manufacturer); once you select the make and model, enter the restraint system module and read the error codes: in this case, it refers to the driver's airbag, but it is a sporadic fault, so it is sufficient to clear the fault codes to reset the light.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to Reset the Airbag Light on an Audi A4
How to Reset the Airbag Light on an Audi A4
Audi A4 (2000-2004 / B6) How to reset the airbag light on an Audi A4. This operation is very simple. Enter the vehicle, turn on the ignition with the appropriate key, and che…
AIRBAG Warning Light Troubleshooting Instructions
AIRBAG Warning Light Troubleshooting Instructions
Audi A4 (2000-2004 / B6) If the AIRBAG warning light remains on the instrument cluster display, perform a diagnostic check to identify the correct fault code and evaluate the…
How to Turn Off the Passenger Airbag Light
How to Turn Off the Passenger Airbag Light
Audi A4 (2000-2004 / B6) This video shows how to turn off the airbag light. First, connect the scan tool to the vehicle, which informs us of any errors in the control module.…

    Frequently Asked Questions

    • A4 2007-2016 - What does the yellow engine warning light mean in the Audi A4? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos