Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Pressure Light on an Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Tire pressure warning light

This short video tutorial demonstrates how to reset the tire pressure light, or TPMS light, on an Audi A4, model produced from 2007 to 2016. First, turn on the vehicle's instrument cluster by inserting the key and turning on the ignition. Next, press the "car" button located on the radio controls to open the menu on the central display of the dashboard. Now, use the knob to select the tire pressure option and finally use the knob again to select the reset option and execute it.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Light in an Audi A4?
How to Reset the Tire Light in an Audi A4?
Audi A4 (2014-2024 / B9) In this tutorial, you will see how to reset the tire light in an Audi A4, a very simple and quick operation to perform only after restoring the corre…
Reset Tire Pressure Light on Audi A4 B8
Reset Tire Pressure Light on Audi A4 B8
Audi A4 (2007-2016 / B8) Before performing the reset procedure, check the condition of the tires and their pressure using a gauge. If everything seems normal but the tire pre…
How to Reset the Tire Light on an Audi A4?
How to Reset the Tire Light on an Audi A4?
Audi A4 (2007-2016 / B8) In this video, you will see how to reset the tire light on an Audi A4, a procedure to perform only after restoring the correct pressure in all tires.…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos