Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the control unit in the Audi A4?

Model: Audi A4 B6 - Years 2000-2004
Part: Control unit

In this tutorial we can see how to disassemble the control unit in the Audi A4, a very simple and fast operation. First of all, make sure that the key is not inserted, then open the bonnet, locate the battery and disconnect the negative terminal. We then disassemble the left windscreen wiper by unscrewing the relative bolt, slightly lift the plastic plate of the base and remove the upper half of the protective cover of the control unit. At this point we can release the fixing bracket, remove the control unit from its housing and disconnect the connector.

Posted on 24 February 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the control unit on Audi A4
How to remove the control unit on Audi A4
Audi A4 (1994-2000 / B5) How to disassemble the control unit on Audi A4? Let's see in this video how to perform the disassembly: unscrew the wiper rods with a special key, re…
How do you replace the control unit of the Audi A4?
How do you replace the control unit of the Audi A4?
Audi A4 (2004-2008 / B7) The control unit of the Audi A4 is located inside the engine compartment: it is located in the upper part of it, immediately below the windshield on …
Where is the engine control unit located in the Audi A4?
Where is the engine control unit located in the Audi A4?
Audi A4 (2004-2008 / B7) In this video, we can see where the engine control unit is located in the Audi A4 and how to proceed in case we need to remove it, a very simple oper…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos