Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the wheel with the spare one from the Audi A6

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Wheel

In this guide we will see the useful procedure for disassembling and replacing the wheel with the spare one on the Audi A6. First of all let's get the whole wheel replacement kit, also pressing the spare wheel; we then use the appropriate pliers to remove the bolt caps, as illustrated in the video. At this point we use the key supplied to loosen the bolts, subsequently raising the car with the jack; we remove the wheel and finally install the small wheel or spare wheel, cross-fixing the bolts and positioning all the equipment on the luggage compartment!

Posted on 16 March 2023 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Audi A6 2.0 TDI
Guide to replacing the timing belt of the Audi A6 2.0 TDI
Audi A6 (2011-2018 / C7, MK 4) The following steps will show us how to disassemble and replace the timing belt of the Audi A6 2.0 TDI. First, lift the car and start by disassemblin…
Fuse box and other accessories of the Audi A6 C6
Fuse box and other accessories of the Audi A6 C6
Audi A6 (2004-2012 / MK 3, C6) In this video we will see where the main fuse box of the Audi A6 C6 version is located, that is, the one produced from 2004 to 2012. We will also see…
How to replace the battery of an Audi A6.
How to replace the battery of an Audi A6.
Audi A6 (2004-2012 / MK 3, C6) Below we will see the steps that will allow us to disassemble and replace the battery of the Audi A6, following the instructions below. First, we ope…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos