Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you adjust the headlights on the Audi A1?

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Checks and maintenance

To be able to adjust the headlights of the Audi A1 you must first turn on the headlights to be able to check the direction of the light beam: then you will have to open the bonnet, so that you can locate the screw located in the upper central part of the optical unit . This screw must be tightened in order to raise the beam and loosened in order to lower the beam; once the headlight adjustment has been completed it will be possible to close the bonnet; at that point it will also be possible to switch off the lights completely using the appropriate knob.

Posted on 20 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlights of the Audi A1
How to replace the front headlights of the Audi A1
Audi A1 (2010-2018 / MK 1, 8X) Replacing the front headlights of an Audi A1 or Audi S1 vehicle is a simple and quick operation that can be done independently. To replace the headli…
How do you activate the fog lights on the Audi A1?
How do you activate the fog lights on the Audi A1?
Audi A1 (2010-2018 / MK 1, 8X) In order to activate the fog lights of the Audi A1, you need to insert the ignition key into the corresponding slot, in order to turn on the instrume…
How to set the clock on the Audi A1
How to set the clock on the Audi A1
Audi A1 (2010-2018 / MK 1, 8X) The steps to adjust the time and date of the onboard computer of the 2010 Audi A1 model 8X are: -turn on the instrument panel; -press the onboard com…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos