Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Rear Stabilizer Link

Model: Audi A4 B6 - Years 2000-2004
Part: Control arm

To comfortably replace the rear stabilizer link, lift the vehicle on a hydraulic lift and remove the rear wheel; then, unscrew the nut that secures the ball joint pin of the link to the stabilizer bar. Next, unscrew the bolts that secure the lower flange of the link to the suspension control arm to complete the disassembly. Then, install the new link by first securing the lower flange with the two bolts, and then tighten the nut of the upper joint to the stabilizer bar.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear windshield wiper motor of the Audi A4
Replacement of the rear windshield wiper motor of the Audi A4
Audi A4 (2004-2008 / B7) In this short guide, we will see the instructions that will allow us to disassemble and replace the rear windshield wiper motor of the Audi A4. First…
How to remove the rear seats of the Audi A4.
How to remove the rear seats of the Audi A4.
Audi A4 (2004-2008 / B7) Below we will see the steps to disassemble the rear seats of the Audi A4, following the instructions below. First of all, we open both rear doors and…
How to replace the rear light on an Audi A4
How to replace the rear light on an Audi A4
Audi A4 (2004-2008 / B7) Before starting, we will have to go to open the tailgate of our Audi A4. So let's start by disengaging and moving the cover of the light fixing screw…

Other guides you may be interested in

How to Replace the Spark Plugs of the Chevrolet Spark

Release and lift the bonnet. The first step is to disconnect the battery plugs to protect all electronic components. Now, remove the bolts securing the cover to the engine, disconnecting the hose on the side as well. Disconnect the connectors on top of the coils and then remove the coils by pulling them straight up after removing the bolts that hold them in place. Now, using a socket wrench, unscrew the spark plugs from the bottom of the newly freed hole, taking care not to let too much dirt enter this cylinder.

Watch the video!


by ScegliAuto

More videos