Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on Audi A1

Model: Audi A1 8X, MK 1 - Years 2010-2018
Part: Service warning light

In this video guide, learn how to reset the service light, which indicates the remaining life of the engine oil, on a first-generation Audi A1, produced from 2010 to 2018. Start by turning on the vehicle's instrument cluster without starting the engine, then press the "SET" button on the left of the speedometer until the maintenance interval message appears. Next, press the "0.0" button on the right of the speedometer to perform the reset. Finally, restart the vehicle to check that the light has reset correctly.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A1 (2010-2018 / 8X, MK 1) In today's tutorial, you will learn how to reset the service light for routine maintenance on an Audi A1. First, get inside the vehicle and reset the…
Audi A1 (2010-2018 / 8X, MK 1) The following steps will allow us to reset the service maintenance light of the Audi A1. First of all, we get into the car and start the instrument p…
Audi A1 (2018-2025 / MK 2, GB) In this tutorial, we will see how to reset the service light in the Audi A1, a very simple and quick operation to perform only after completing all s…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos