Do it yourself
| ||||
|
Audi A4 - Video tutorial
Model: Audi A4
B7
- Years 2004-2008 In this guide, we will see step-by-step instructions on how to disassemble and replace the timing belt and water pump of the Audi A4 2.0 TFSI. First, lift the vehicle and begin by removing the right front wheel; then unscrew the fastening screws of the fender liner to remove it, as shown in the video. Now, unscrew the screws of the front bumper and disconnect the various electrical connectors on the back, removing it; then remove the alternator belt and disassemble the engine support. Now, remove the spark plugs and the distribution cover, taking the necessary references for the replacement of the timing belt, following the video until the end!
Posted on 4 July 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.040
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |