Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Interior Door Lock Button

Model: Audi A4 B6 - Years 2000-2004
Part: Push button

On the door panel, in front of the release lever, there is a button that allows you to open and close the door locks from the inside: if this button is defective and needs to be replaced, you will need to remove the door panel. Start by detaching the aluminum-effect trim covering the upper section of the panel to access the screws underneath; then remove the cover inside the handle and unscrew the screws located beneath it, followed by the screws along the bottom edge of the panel. Next, pry along the edges to release the retaining clips and remove the panel by disconnecting the connectors and the lock cable. At this point, you can release the retaining tabs of the button and pull it out from its housing.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Muffler
Instructions for Removing the Muffler
Audi A4 (2000-2004 / B6) To remove the muffler, it is advisable to place the vehicle on automotive ramps to lift it sufficiently for easier access to the undercarriage; also,…
Removing the Starter Motor on Audi A4
Removing the Starter Motor on Audi A4
Audi A4 (2007-2016 / B8) Remove the faulty starter motor from an Audi A4. Let's go through the disassembly of the part. Lift the hood and secure it, locate the battery, and d…
Complete Removal of Front Seat
Complete Removal of Front Seat
Audi A4 (2000-2004 / B6) Removing the front seat may be necessary if you need space to transport materials or simply to replace it because it is damaged. The seat removal pro…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos