Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the fuel pump of the Audi TT.

Model: Audi Tt MK 1, 8N - Years 1998-2006
Part: Fuel pump

Today's guide will show us the steps on how to disassemble and replace the fuel pump of the Audi TT. First, we open the front door and recline the backrest, thus accessing the rear part; then we proceed to remove the rear seat, in order to access the fuel pump, as shown in the video. At this point, we disconnect the fuel line and the electrical connector, unscrew the pump nut to remove it and replace it with the new one (as well as the original one); then we reassemble the fuel pump and verify its operation!

Posted on 12 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the fuel pump of an Audi TT
How to disassemble the fuel pump of an Audi TT
Audi Tt (1998-2006 / MK 1, 8N) Before we can begin, we will have to get inside the cockpit of our Audi TT. So let's start by disengaging and removing the lower bench of the rear se…
Fuel float repair on Audi TT
Fuel float repair on Audi TT
Audi Tt (2006-2014 / 8J, MK 2) To get to the fuel pump you will have to remove the rear passenger seat by lifting it from underneath and sliding it off the seat belts. You will thu…
How to open the fuel cap on Audi TT
How to open the fuel cap on Audi TT
Audi Tt (1998-2006 / MK 1, 8N) We unlock the Audi TT's refueling flap if we can't open it. To begin with, we open and lift the tailgate with a special key or button. We uncover the…

Other guides you may be interested in

How to Remove the Center Console on a Mercedes C-Class

Let's see how to remove the center console on a Mercedes C-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center console. Remove the leather shift boot along with its plastic frame. After removing the cover, unscrew the fastening screws located at the top of the center console with a screwdriver. Once this is done, pull the console away and disconnect the power cables for the knob. Finally, insert the new piece into the center console area and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos