Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Headlight bulb

Through this short procedure, we will see how to disassemble and replace the front headlight bulb of the Audi A4, following the instructions below. First, open the car's engine hood and start by removing the plastic protective cap of the bulbs; then disconnect the electrical connector of the light and remove the xenon bulb, as shown in the video. At this point, install the new xenon bulb, of the correct type and with the same attachment; make the electrical connection and finally fix the plastic protective cap, adjusting the height of the lights if necessary.

Posted on 29 September 2023 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Left Front Turn Signal Bulb on an Audi A4
Replacing the Left Front Turn Signal Bulb on an Audi A4
Audi A4 (2007-2016 / B8) Let's see how to replace the left front turn signal bulb on an Audi A4. Open the hood and secure it; remove the plastic cover above the grille. Disas…
How to replace the headlight bulb of the Audi A4
How to replace the headlight bulb of the Audi A4
Audi A4 (2004-2008 / B7) To replace the rear headlight bulb of an Audi A4 model b7, we need to: - open the trunk; - unscrew the screw located on the inside, towards the headl…
Audi A4 headlight bulb replacement
Audi A4 headlight bulb replacement
Audi A4 (2004-2008 / B7) In this guide, we will see the main instructions that will allow us to disassemble and replace the Audi A4 headlight bulb. First of all, we open the …

Other guides you may be interested in

How to Remove the Third Brake Light from a Renault Clio

In this video, we will see how to remove the third brake light from a Renault Clio. First, open the boot lid and remove the plastic rivets with a screwdriver, then close the boot. Extract the third brake light from the metal of the boot lid using your hands. Once the piece is removed from its housing, disconnect the power connector and attach the new third brake light. After fitting the bulbs, insert the piece back into the boot lid and secure it with the plastic rivets. Finally, check the correct operation of the lights after turning on the instrument panel.

Watch the video!


by ScegliAuto

More videos