Do it yourself
Frequently asked questions about cars and motorcycles

Spark Plug Replacement and Maintenance

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Spark plugs

Remove the bolt that secures the circuit on the spark plugs, disconnect the connectors attached to the spark plugs, and now you can easily pull the spark plugs out by simply lifting them up. Next, perform initial maintenance by blowing air with a compressor inside the cylinders. Now remove the bolts located at the bottom of each cylinder. If the spark plug electrodes appear black and dirty, the best solution is to burn them with a torch to eliminate any impurities. Give them a new clean with a sheet of sandpaper and reassemble everything by following the steps in reverse.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi Tt (1998-2006 / 8N, MK 1) To change the 6-speed manual transmission oil, the turbo has already been removed in the video because it needs to be replaced, and while we're at it…
Audi Tt (2006-2014 / MK 2, 8J) Resetting the maintenance light on a second generation Audi TT, produced from 2006 to 2014, is a very simple and quick operation to perform, and we c…
Audi Tt (2006-2014 / MK 2, 8J) In this tutorial, we can see how to reset the service in the Audi TT, an extremely simple and quick operation, to be carried out only once all the sc…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos