Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Front Headlight

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Headlight

The video guides you through the repair of the front optical assembly of your vehicle. First, remove the front turn signal as shown. Next, proceed to remove the four screws securing the headlight and disconnect the electrical connectors of the bulbs.
Remove the headlight and disassemble the front covers as shown.
Using a flat tool, pry off the lens and proceed with its replacement, ensuring that the gasket is in excellent condition. Otherwise, you will have water leaks, leading to fogging and premature wear of the lens.
The repair was performed on a BMW 3 Series model E46.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb in a BMW 3
How to Replace the Headlight Bulb in a BMW 3
BMW Serie 3 (2005-2013 / E91, E90, E92) Replace the headlight bulbs in your BMW 3 Series if they are burned out or damaged. Let's go through the disassembly. Open the hood by pulling the le…
Instructions for Removing the Front Headlight
Instructions for Removing the Front Headlight
BMW Serie 3 (1998-2006 / E46) To remove the front headlight, first remove the front turn signal: open the hood and locate the hole on the edge of the fender, near the turn signal.…
Removing Headlight Bulbs on BMW 3 Series
Removing Headlight Bulbs on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Headlight bulbs burnt out? Here’s how to remove them from the car. Open the hood by pulling the lever located at the bottom right of the dashboard an…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos