Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Service" light on a BMW X3?

Model: BMW X3 MK 3, G01 - Years 2017-2024
Part: Service warning light

To reset the "Service" indicator on a BMW X3, follow these steps: turn on the instrument panel without starting the engine, using the Start/Stop button. Once the panel is on, use the buttons on the steering wheel to access the onboard computer menu. Navigate through the menu until you find the "Settings" section and select the "Maintenance" option. Within this menu, you will find various items related to maintenance intervals, such as oil change or general inspection. Select the interval you want to reset and follow the instructions on the display to complete the reset. Hold down the confirmation button until the "Service" indicator turns off, indicating that the system has been successfully updated. After the reset, the indicator should not turn back on until the next scheduled maintenance interval.

Posted on 4 September 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW X3 (2003-2010 / MK 1, E83) Resetting the service light, related to the car service on a BMW X3 model E83, is a simple and quick operation to be carried out independently. To re…
BMW X3 (2017-2024 / MK 3, G01) To reset the "Service" light on a BMW X3, start by turning on the instrument panel without starting the engine. Use the buttons on the steering wheel…
BMW X3 (2017-2024 / MK 3, G01) To reset the "Service" light on a BMW X3, use the controls on the steering wheel to access the onboard computer menu. First, insert the key and press…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos