Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the brake pad indicator light on the BMW X3

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Warning light – error code

In this video, we are shown the procedure for resetting the maintenance light related to the brake pads of the BMW X3 F25. The procedure is simple and takes little time to complete, it is recommended to perform this procedure only after replacing the brake pads. To reset this light, first press and hold the button on the left side of the dashboard, while holding it down start the instrument panel, at this point the maintenance light for the brake pads will appear, now release the button and press it again holding it down to perform the reset, when the message for the reset in progress appears release the button and wait, once the procedure is completed restart the instrument panel to verify that it was successful and that the light is no longer present on the dashboard after the check.

Posted on 30 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Brake Pad Warning Light on a BMW X3?
How to Reset the Brake Pad Warning Light on a BMW X3?
BMW X3 (2003-2010 / MK 1, E83) To reset the brake pad wear warning light on a BMW X3, first replace the worn brake pads. Once replaced, enter the cabin and turn on the ignition: th…
How to Replace the Rear Brake Pads on a BMW X3
How to Replace the Rear Brake Pads on a BMW X3
BMW X3 (2010-2017 / MK 2, F25) To replace the rear brake pads on a BMW X3 with electric parking brake, connect a diagnostic tool to the vehicle, perform the operations indicated by…
How to Replace the Rear Brake Pads on a BMW X3?
How to Replace the Rear Brake Pads on a BMW X3?
BMW X3 (2010-2017 / MK 2, F25) In this tutorial, you will see how to replace the rear brake pads on a BMW X3. First, lift one side of the vehicle with a jack, then remove the wheel…

Other guides you may be interested in

    Frequently Asked Questions

    • X3 2010-2017 - Why does the 4x4 warning light come on on the BMW X3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos