|
Do it yourself
| |||
| ||||
How to Replace the Rear Brake Pads on a BMW X3
Model: BMW X3
MK 2, F25
- Years 2010-2017
To replace the rear brake pads on a BMW X3 with electric parking brake, connect a diagnostic tool to the vehicle, perform the operations indicated by the diagnostic tool, and when the message appears that the elements are released, you can work on the rear while keeping the diagnostic tool connected. Start with the left side by removing the wheel. Unscrew the bolts (hold one with a wrench and unscrew with the other) that secure the caliper to the bracket on the rotor, move the caliper aside, and remove the old pads. After removing the old pads, clean the bracket with a wire brush, install the new pads in the same way as the old ones, use a special tool to retract the caliper piston, reposition it on the rotor bracket, and screw in the bolts (hold one with a wrench and tighten with the other). Now clean the hub of the rotor with a wire brush and apply copper grease before reinstalling the wheel. Perform the same operation on the right side, but for the right side, once you disconnect the wear indicator for the pads, reconnect it to the caliper and then attach it to the various clips until it reaches the original connector. Get back in the vehicle and continue the procedure on the diagnostic tool, and the procedure is complete.
Updated on 15 August 2026 by ScegliAuto
Video tutorial
Related tutorials
BMW X3
(2010-2017 /
MK 2, F25)
.. In this tutorial, you will see how to replace the rear brake pads on a BMW X3. First, lift one side of the vehicle with a jack, then.. …
BMW X3
(2003-2010 /
MK 1, E83)
Lift the vehicle with a jack to the desired height. Next, remove the wheel using a socket wrench or air drill with the respective bolts. Unscrew the …
BMW X3
(2003-2010 /
MK 1, E83)
Are the front brake pads due for replacement? Here’s how to change them on a BMW X3. Lift the vehicle on a column lift to a comfortable height, then …
Other guides you may be interested in
|
How to Open the Fuel Cap of the Volkswagen Jetta
When you need to refuel this vehicle, first open the fuel filler flap. Follow these simple instructions, and you can also watch the video for more details. First, unlock the central locking to open the flaps. Then, press the fuel cap with your hand to unlock it and open it. Underneath, you will find the fuel cap, which you need to unscrew counterclockwise. At this point, you can proceed to refuel. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.106
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |