Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the external temperature sensor located in the BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Checks and maintenance

In this video we can see where the external temperature sensor is located in the BMW 3 Series and how to proceed in case we need to replace it, a very simple operation. As shown, the sensor in question is located in the lower internal area of the bumper, right at the height of the left air intake. To replace it, we will first have to remove the bumper itself, unscrewing all the relevant fixing bolts, and then lift the rubber cover of the air intake and detach it from the support. To install the replacement, just follow the reverse procedure.

Posted on 12 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Localization and replacement of the external temperature sensor on the BMW Series 3 E90.
Localization and replacement of the external temperature sensor on the BMW Series 3 E90.
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, we can see where the external temperature sensor of the BMW Series 3 E90 version is located and how to potentially change it: unfortun…
Replacing Temperature Sensor on BMW 3 Series
Replacing Temperature Sensor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the temperature sensor on a BMW 3 Series? Raise the hood of the car to locate the temperature sensor and remove it. Remove the engi…
How to Remove the Outside Temperature Sensor on a BMW 3 Series
How to Remove the Outside Temperature Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's see how to remove the outside temperature sensor on a BMW 3 Series. Lift the car on a column lift and remove the wheel. To remove the temperatu…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos