Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Steering Arm

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Control arm

The necessary tools are a ratchet wrench, a set of open-end wrenches, and the replacement arm. Lift the car and secure it with appropriate jack stands so it cannot fall. Remove the wheel to access the mechanics. Once the broken arm is located, proceed with removal by unscrewing all the bolts. Also, remove the steering arm support by unscrewing the two bolts. Check the rest of the mechanics, especially the vibration dampers that support the arms; replace them if necessary. Reinstall the new arm and the rest of the previously removed mechanics.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the front suspension arm of the BMW series, lift the car and remove the front wheel, clean the fixing nuts, unscrew the nuts that secure t…
BMW Serie 3 (1998-2006 / E46) The necessary tools are a ratchet wrench, a puller, and the original replacement bushings. Lift the car on a lift to access the underlying mechanics.…
BMW Serie 3 (2005-2013 / E91, E90, E92) Position the car on a level surface and lift it using a jack at the front left position. Remove the wheel. Locate the control arm and, if necessary, …

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos