Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the brake light on a BMW 7 Series

Model: BMW Serie 7 MK 6, G11, G12 - Years 2015-2022
Part: Warning light – error code

In today's guide, we can see how to reset the brake maintenance light on a BMW 7 Series, model produced from 2015 to 2022. Let's start the procedure by pressing the vehicle's ignition button three times to turn on the instrument panel and activate the diagnostic mode. Once this is done, press and hold the button on the left of the speedometer for a few seconds to enter the service menu. Then go to the section related to brake pad maintenance and press and hold the speedometer button again until the reset request appears, then release the button and hold it down again to perform the reset. To perform this operation, it is necessary to have the handbrake disengaged.

Posted on 1 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Sensors on the BMW 7 Series
How to Reset the Tire Pressure Sensors on the BMW 7 Series
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) This guide provides instructions to reset the tire pressure sensors on the BMW 7 Series. Before resetting the TPMS warning light, ensure all four tir…
How to Reset the Brake Wear Indicator on a BMW 7 Series?
How to Reset the Brake Wear Indicator on a BMW 7 Series?
BMW Serie 7 (2008-2015 / F01, MK 5, F02) To reset the brake wear indicator on a BMW 7 Series, turn on the ignition to navigate through the menu options. Using the BC button located on the le…
How to Reset the Tire Light on a BMW 7 Series?
How to Reset the Tire Light on a BMW 7 Series?
BMW Serie 7 (2015-2022 / MK 6, G11, G12) In this tutorial, you will see how to reset the tire light on a BMW 7 Series, a very simple and quick operation that should be done only after restor…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos