Do it yourself
| ||||
|
BMW Serie 7 - Video tutorial
Model: BMW Serie 7
MK 5, F01, F02
- Years 2008-2015 In order to reset the brake wear warning light on the BMW 7 Series, you will need to turn on the instrument panel, so that you can move within the items on the corresponding menu: using the BC button located on the lever to the left of the steering wheel, you will have to reach the entry that indicates that the brakes are worn. When this screen is present on the instrument panel, it will be necessary to hold down the BC button until the loading for the reset of the warning light has been completed. After this operation it will be possible to notice that the brake wear warning light will have been completely reset.
Posted on 19 December 2022 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |