Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Brake Wear Light on a BMW 7 Series?

Model: BMW Serie 7 F01, MK 5, F02 - Years 2008-2015
Part: Warning light – error code

To reset the brake wear light on a BMW 7 Series, turn on the ignition to access the dashboard menu. Press and hold the button located at the bottom left of the dashboard until the icon of the car with the brake wear light appears. Once this icon is displayed, continue to hold the same button for a few seconds. At this point, you can verify that the brake wear light has been successfully reset, and you can turn off the ignition.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Brake Wear Indicator on a BMW 7 Series?
How to Reset the Brake Wear Indicator on a BMW 7 Series?
BMW Serie 7 (2008-2015 / F01, MK 5, F02) To reset the brake wear indicator on a BMW 7 Series, turn on the ignition to navigate through the menu options. Using the BC button located on the le…
How to Reset the Brake Fluid Light in a BMW 7 Series?
How to Reset the Brake Fluid Light in a BMW 7 Series?
BMW Serie 7 (2015-2022 / MK 6, G11, G12) In this tutorial, you will see how to reset the brake fluid light in a BMW 7 Series, a very simple and quick operation that should only be performed …
How to Reset the Brake Service on a BMW 7 Series?
How to Reset the Brake Service on a BMW 7 Series?
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) As seen in this tutorial, resetting the brake service on a BMW 7 Series is an extremely simple and quick operation. Before proceeding, ensure you hav…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos