Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Front Headlight of a BMW 5 Series

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

See other generations:
Video tutorial

Want to remove the front headlight of a BMW 5 Series? Let's see how to proceed with the removal. Open the hood by pulling the hood release lever and secure it. Unscrew the retaining screws on the front headlight with a screwdriver.

Once you reach this point, disconnect the power connectors and pull the headlight out of the vehicle. Install the new headlight with new bulbs if damaged (always use the correct type and size) and insert the headlight into its housing.

Finally, tighten the screws on the headlight with the plastic trim. Test the proper functioning of the lights.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove Condensation from the Front Headlight of BMW 5 Series
How to Remove Condensation from the Front Headlight of BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, you will see the instructions that will allow you to disassemble the front headlight and remove any condensation from the BMW 5 Series. First,…
How to disassemble and replace the front headlight and bulbs of the BMW 5 Series
How to disassemble and replace the front headlight and bulbs of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) In this guide we will see the instructions that will allow us to disassemble and replace the front headlight and its bulbs of the BMW 5 Series. First…
Replacing the Headlight Bulb on the BMW 5 Series
Replacing the Headlight Bulb on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, you will see step-by-step instructions to remove and replace the xenon headlight bulb on the BMW 5 Series. To access the headlight bulb, raise…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos