Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Maintain the Steering on a BMW 3 Series

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Checks and maintenance

In this video, see how to maintain the steering on a BMW 3 Series. Is the steering hard to turn? Replace the power steering fluid to solve the problem and flush the power steering system. Start by opening and lifting the hood, securing it, and inserting the fluid suction hose into the power steering reservoir. After draining the reservoir of the old fluid, fill it with a flushing additive. Once the flushing is complete, suction out the old fluid and refill with new oil. Test the proper functioning of the steering with various steering maneuvers.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Steering Wheel on the BMW 3 Series
Replacing the Steering Wheel on the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today's guide will show you the steps to remove and replace the steering wheel on the BMW 3 Series, following the instructions below. First, get insi…
Replacing the Steering Angle Sensor on a BMW 3 Series
Replacing the Steering Angle Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide will show you how to remove and replace the steering angle sensor on a BMW 3 Series. First, get inside the vehicle and start by removing t…
How to Reset the Steering Angle Sensor on a BMW 3 Series?
How to Reset the Steering Angle Sensor on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To reset the steering angle sensor on a BMW 3 Series, use a diagnostic tool: first, position the steering wheel so that the wheels are perfectly stra…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos