Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Power Steering Pump on a BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Power steering fluid

See other generations:
Video tutorial

If the steering wheel rotation has become particularly heavy, almost impeded, but improves slightly when accelerating, it means that the pump that pressurises the power steering fluid has failed. Since it is driven by the auxiliary belt, its operation depends on the engine's RPM. To replace this pump, lift the vehicle and detach the auxiliary belt, disconnect the oil inlet and outlet pipes, and unscrew the pump's mounting bolts.

Then transfer the support bracket and pulley from the old pump to the new one and proceed in reverse for installation, also restoring the oil level: it is recommended to flush the system by completely replacing the power steering fluid.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

BMW Serie 1 (2011-2019 / F21, MK 2, F20) The instructions in this guide will show you how to remove and replace the electric power steering motor on the BMW 1 Series. First, raise the vehicl…
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Before you start, sit in the driver's seat of your BMW 1 Series. Begin by pulling the bonnet release lever located at the bottom right of the driver'…
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today, with the help of this video tutorial, you will learn in detail how to replace the water pump on the BMW. This operation can be carried out ind…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos