Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door panel of the BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Door trim panel

These short and simple instructions will show us how to disassemble and replace the rear door panel of the BMW 5 Series. First, we open the rear door of the car and start removing the plastic cover of the opening handle, using a thin plastic lever; then we unscrew the screws found underneath, as shown in the video. Now we remove the window pillar and lever on the sides of the panel to detach and remove it, disconnecting the electrical connector of the window button and the handle cable; finally, we reassemble everything!

Posted on 15 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the rear door panel of the BMW 5 Series
Disassembly of the rear door panel of the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Today we will discover the instructions that will allow us to disassemble and replace the rear door panel of the BMW 5 Series. First of all, we open …
How to Remove the Rear Door Panel of the BMW 5 Series
How to Remove the Rear Door Panel of the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) In this video tutorial, you will learn how to remove the rear door panel of the BMW 5 Series by following these simple and quick steps. First, open t…
How to Remove and Replace the Door Panel of a BMW 5 Series
How to Remove and Replace the Door Panel of a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) How to remove and replace the door panel of a BMW 5 Series? Use a pry tool to remove the plastic trim above the door panel. Then, unscrew the fasteni…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos