Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install and connect the dashcam on the BMW X1

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

See other generations:
Video tutorial

This brief guide will show us the main instructions on how to install the dashcam or recording camera on the BMW X1. First of all, we get on board the car and start positioning the dashcam on the front part; it will then be necessary to pass the wiring to the internal fuse box (passing the cables on the rear of the side pillars), then making a direct connection to the battery, as shown in the video.

We then install the fuse to connect to the dashcam, in order to avoid any damage, following the video tutorial until the end!


Posted on 1 February 2025 by ScegliAuto


Related tutorials

How to Install the Light in the Glove Compartment of the BMW X1
How to Install the Light in the Glove Compartment of the BMW X1
BMW X1 (2022-2026 / U11) Today, you will learn how to install the bulb in the glove compartment of the BMW X1. To install the bulb, there is no need to connect any internal e…
How to Install Roof Rails on the BMW X1?
BMW X1 (2015-2022 / F48) To install the roof rails on the BMW X1, access the interior of the vehicle to remove all components that prevent the headliner from being taken down…
How to Remove the Front Bumper of the BMW X1?
How to Remove the Front Bumper of the BMW X1?
BMW X1 (2009-2015 / E84) To remove the front bumper of the BMW X1, open the hood to access the screws securing the bumper from the top. Once these screws are loosened, detach…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos