Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the fuse box of the BMW 3 Series e90?

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Fuse box

The fuse box is the one that houses, precisely, the fuses, which are responsible for protecting electronic and electrical utilities in the car from overloads. Regarding the BMW 3 Series E90, it is found housed behind the dashboard glove compartment, as shown in the available video, so if we want to remove it, we will have to: Open the same compartment, locate the aforementioned box, remove its cover, unscrew the pins holding it in place, and finally disconnect the connector of the connected electrical cables. It is a relatively simple job that anyone can do.

Posted on 10 February 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Where is the fuse box located in the BMW 3 Series E90?
Where is the fuse box located in the BMW 3 Series E90?
BMW Serie 3 (2005-2013 / E92, E90, E91) If you have not yet been able to find the box containing all the fuses of your BMW 3 Series e90, do not worry. In the following guide you will find t…
Where is the fuse box of the BMW 3 Series E90
Where is the fuse box of the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) The fuse box of your BMW 3 Series E90 (year 2005-2013) is located in a very well hidden position inside the passenger compartment so it is not always…
How to replace the side turn signal bulb of the BMW 3 Series E90
How to replace the side turn signal bulb of the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) If you own a BMW 3 Series E90 and want to find out how to replace the side indicator bulb, all you have to do is follow the steps described in our ne…

Other guides you may be interested in

How to Remove the Instrument Cluster on a Nissan Qashqai

How to remove the instrument cluster on a Nissan Qashqai? Follow these steps: use a lever to remove the trim plastics under the steering wheel and take out the air vent next to the instrument cluster. Unscrew the securing screws of the instrument cluster with a screwdriver; after removing the plastics, pull out the ignition button (right side) from the dashboard and detach the plastics in the centre of the cluster. Unscrew the securing screws around the instrument cluster and remove it along with the power cable located at the back of the cluster. Install a new part or replace the LEDs/bulbs in the cluster and reassemble it.

Watch the video!


by ScegliAuto

More videos