Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper of a BMW 4 Series?

Model: BMW Serie 4 F32, F36, MK 1, F33 - Years 2013-2020
Part: Front bumper

To replace the air filter of a Dacia Duster, start by turning off the engine and opening the hood. Locate the air filter box, which is usually located near the front of the engine. Use a screwdriver to remove the screws or clips that hold the air filter box closed. Once removed, lift the cover of the box and remove the old air filter. Take note of the orientation of the filter to ensure you insert the new filter correctly. Insert the new air filter into the box, making sure it is positioned correctly. Replace the cover of the filter box and screw the screws back in or put the clips back in place. Make sure the cover is securely fastened to prevent dirt and debris from entering the intake system. Close the hood and start the engine to verify that everything is working correctly.

Posted on 19 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Bumper on a BMW 4 Series
How to Replace the Front Bumper on a BMW 4 Series
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) Hello, in this video you will see how to remove the front bumper from the beautiful BMW 4 Series. It is quite a complex procedure. First, it is advis…
How to disassemble the rear bumper of the BMW 4 Series
How to disassemble the rear bumper of the BMW 4 Series
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) The following steps will show us how to disassemble and replace the rear bumper of the BMW 4 Series, following the instructions below. First, let's m…
How to replace the windshield washer pump of the BMW 4 Series
How to replace the windshield washer pump of the BMW 4 Series
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) These short and simple steps will allow us to disassemble and replace the windshield washer pump of the BMW 4 Series. First, we lift the car and star…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos