Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Wheel Bearing Replacement

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Bearing

See other generations:
Video tutorial

Obtain replacement bearings. Lift the vehicle, secure it, and remove the wheel.

Remove the metal cover protecting the retaining bolt on the hub, which will then need to be unscrewed. If you encounter difficulties, use penetrating spray.

Disassemble the entire brake assembly to free the axle. Free the half-shaft by unscrewing the bolts at the base of the driveshaft and remove it. Also, remove the sway bar. Use a puller to remove the rotor to access the bearing.

Remove the bearing's retaining ring and use a puller to free the bearing. Clean thoroughly from old grease.

Then, place the new bearing inside after properly greasing it. Using a piece of wood, tap with a hammer to fit the bearing perfectly into its seat. Reassemble all parts that were previously removed.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Wheel Bearing on the BMW 3 Series
Replacing the Rear Wheel Bearing on the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's main steps will show you how to disassemble and replace the rear wheel bearing on the BMW 3 Series. First, lift the vehicle and start removin…
Rear Wheel Bearing Replacement
Rear Wheel Bearing Replacement
BMW Serie 3 (1998-2006 / E46) Obtain replacement bearings. A faulty bearing can also compromise the axle, so replace it immediately. Lift the vehicle, secure it, and remove the wh…
Front Wheel Bearing Replacement
Front Wheel Bearing Replacement
BMW Serie 3 (1998-2006 / E46) A faulty bearing can also compromise the axle, so replace it immediately. Obtain replacement bearings. Lift the vehicle, secure it, and remove the wh…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos