|
Do it yourself
| |||
| ||||
Error codes CC-ID on BMW Series 1-3-5 and X5
Model: BMW Serie 1
E81, E82, MK 1, E87
- Years:
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
The term CC-ID on a BMW vehicle refers to the check control identification code, which monitors the various functions of the car, and when a malfunction occurs, it displays an error message. Error messages can be cleared, once resolved, using the lever on the left side of the steering wheel, scrolling through the menu until reaching the "check" option, where we can see all the error messages that are stored, which can be viewed by holding down the "BC" button at the end of the lever; we will scroll through them by releasing the button gradually. Some of the most common ones are: 164 low windshield washer fluid level, 115 right reverse light bulb; 117 left reverse light bulb; e71 brake pad error. All codes are listed in the owner's manual.
Posted on 3 November 2025 by ScegliAuto
Related tutorials
BMW Serie 1
(2004-2013 /
E81, E82, MK 1, E87)
In the BMW 1 Series and other similar models, there are two fuses dedicated to protecting the window lifter motor. The assigned identification codes …
BMW Serie 1
(2024-2026 /
F70)
Today we will explain how to reset the service light and error code for the brake pads of the BMW 1 Series model F 70 from 2024. To eliminate the mes…
BMW Serie 1
(2004-2013 /
E81, E82, MK 1, E87)
Calibrating a steering angle sensor is not complicated at all. On some car models, you only need to turn the steering wheel fully to the left and the…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |