Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the SOS battery of a BMW E90

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Checks and maintenance

Let's see how to replace the SOS battery in a BMW Series 3 E90: this is a safety component, a lithium battery that we will purchase identical to the old one, checking the code on the one to be replaced. The SOS module is located above the interior rearview mirror and is held in place by clips. We gently pry with a thin screwdriver in the gap between the mirror cover and the windshield; we will see the module, from which we will disconnect the electrical connectors. The module is housed in a smaller box. We open it to access the battery, which is flat and rectangular, similar to those in old phones, with a two-wire connector that we will disconnect. We install the new battery and reconnect the connector. We can find the battery on AliExpress under the code 1005008472370516 for the price of 7.99 euros + 5.35 euros for shipping. We put everything back inside the windshield and close it up.

Posted on 27 November 2025 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2012-2019 / F30, F31) To replace the SOS battery of the BMW 3 Series, you need to pry with an object to detach the cover in the rear of the car ceiling: once this cover ha…
BMW Serie 3 (2005-2013 / E91, E90, E92) If there were any doubts about replacing the power battery of the BMW 3 Series e90, the video attached here is certainly an excellent guide to dispel…
BMW Serie 3 (2012-2019 / F30, F31) In this video, we will see how to repair the SOS-call system of a BMW 3 Series F31 version car: the module is located in the rear part of the car's c…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos